Home page

Density of steel rod

Release time:

2024-05-13

The density of steel rods typically ranges from 7.85g/cm³ to 8.3g/cm³, depending on the type and composition of the steel.

The density of steel rods typically ranges from 7.85g/cm³ to 8.3g/cm³, depending on the type and composition of the steel. For example:

The density of ordinary carbon structural steel is about 7850kg/m³, which is 7.85g/cm³.
For certain types of steel, such as high-speed steel containing 9% tungsten, the density can reach 8.3g/cm³.
The densities of 303 stainless steel and 12Cr18Ni9 steel rods are both 7.93g/cm³.

Different types of steel rods have slightly different densities. For example, the densities of low carbon steel, medium carbon steel and high carbon steel are about 7.85g/cm³, 7.82g/cm³ and 7.81g/cm³ respectively. The density of high-speed steel with the highest density, such as the version containing 18% tungsten, can reach 8.7g/cm³.

Latest News

The correct way to install steel coils

The correct way to load steel coils depends on their size, weight and how they are transported or stored.

2024-05-13

Steel pipe material

Steel pipes can also be divided into seamless steel pipes and welded steel pipes according to the production process. Seamless steel pipes are divided into hot-rolled and cold-rolled (drawn). Welded steel pipes are divided into straight seam welded steel pipes and spiral seam welded steel pipes.

2024-05-13

Steel rod size standards

The size standards of steel rods cover steel rods of different shapes and sizes, including round steel, square steel, flat steel, hexagonal steel, octagonal steel, etc. These standards mainly involve cross-sectional shape, size, weight and allowable deviations, length and allowable deviations, and appearance.

2024-05-13

The difference between steel coils and steel strips

The difference between steel coils and steel strips mainly lies in their size and use. Steel coils usually refer to larger width coils, while steel strips refer to narrower coils and are used in specific processing areas.

2024-05-13

Can steel plates and stainless steel be welded?

Steel plates and stainless steel can be welded. Before welding, it is necessary to use an angular grinding wheel to grind off the galvanized layer at the place to be welded.

2024-05-13

The role of angle steel

Angle steel is a versatile structural steel that is widely used in various fields.

2024-05-13